Einsteckfühler
Plug-in resistance sensors are ideal for all possible application of temperature measuring. They are available as straight and right-angle design. There are clamp-screws, screws, clips and stop rings available for mounting. Springs with special-fiberglass hose and 400 °C heat resistant varnish are standard. Standard leads are galvanized copper wires with PTFE and fiberglass insulation covered by stainless steel metal braid. The PWF 15 is a right-angle sensor. The bend Ø 6 x 37 mm protection tube has soldered Ø 2.5 x 6 mm notch pin at the front side. The standard sensor tube has a Ø 3.5 and is 20 mm long.
Please find following our standard leads for PWF 15 Resistance sensors listed. Others are available on request.
| part# | cross section | temperature range | outer diameter |
| 1201354 | 2x0.35 mm² Cu-nickel plated |
-50 °C up to +260 °C | 4.6 x 2.8 mm |
| 1201352 | 2x0.38 mm² Cu-nickel plated |
-50 °C up to +260 °C | 3.45 x 1.95 mm |
| 1340642 | 3x0.25 mm² Cu-tinned |
-60 °C up to +260 °C | 3.40 ±0.15 mm |
| 1307789 | 4x0.22 mm² Cu-tinned |
-50 °C up to +350 °C | 4.00 ±0.15 mm |
Miniature - round plugs with screw connection
| 3-pin | plug | T3260 | part# 1201415 |
| socket | T3261 | part# 1200722 |
| 4-pin | plug | T3200 | part# 1103624 |
| socket | T3301 | part# 1200723 |
Miniature plug connectors
| Lemo | cable Ø max. in mm | ||||
| sizes | 0S | 1S | 2S | 3S | |
| standard socket | 3,7 | 4,2 | 4,2 | 4,2 | |
| fitting socket | |||||
| standard plug | 3,7 | 4,2 | 4,2 | 4,2 |
Any
questions?
Find your contact person in one of our locations!
