plug-in sensors

PWF 55

APPLICATIONS

Plug-in resistance sensors are ideal for all possible application of temperature measuring. They are available as straight and right-angle design. There are clamp-screws, screws, clips and stop rings available for mounting. Springs with special-fiberglass hose and 400 °C heat resistant varnish are standard. Standard leads are galvanized copper wires with PTFE and fiberglass insulation covered by stainless steel metal braid.

  • Pt100 gauge slide as per
    DIN EN 60751 – class B
  • two-wire circuit as standard design
  • operating temperature: up to 260 °C
  • isolated
  • sensor tip:
    Ø 8 x 40 mm 1.4301 stainless steel
  • with right-angled outlet
  • 60 mm fiberglass hose as standard anti-kink protection - 400°C heat resistant varnish
  • up to 260°C
    operating temperature
  • Ø 8x40 mm
    sensor tip
  • 60 mm fiberglass
    anti-kink protection

PWF 55 plug-in sensor

Please find following our standard leads for PWF 55 Resistance sensors listed. Others are available on request.

part# cross section temperature range outer diameter
1201354 2x0.35 mm²
Cu-nickel plated
-50 °C up to +260 °C 4.6 x 2.8 mm
1340642 3x0.25 mm²
Cu-tinned
-60 °C up to +260 °C 3.40 ±0.15 mm
1266897 4x0.18 mm²
Cu-nickel plated
-50 °C up to +260 °C 3.90 ±0.15 mm
1307789 4x0.22 mm²
Cu-tinned
-50 °C up to +350 °C 4.00 ±0.15 mm
1300580 4x0.22 mm²
Cu-tinned
-90 °C up to +260 °C 3.50 ±0.10 mm
1307865 4x0.25 mm²
Cu-tinned
-25 °C up to +180 °C 4.50 ±0.15 mm

 

Angular plugs

type J 4-pin consisting of:
    plug part# 1201402
    spout part# 1201407
    angle part# 1201408
markerProductAnimation

Any
questions?

Find your contact person in one of our locations!

Contact

x

Cookies help us in providing our services. By using our services, you agree that we use cookies. Further information