Melt Probe

MTF 112

APPLICATIONS

Melt probes are designed for the usage at extrusion sides. Sword shaped, conical and plane measure tips allow a good temperature recording. Accordingly to the thread melt probes can be screwed at standard holes of the extruder. It is to select between single and double thermocouple and isolated or not isolated design. The very robust MTF 112 increases the working time of the sensor. Due to the conical design of the sensor there is no justification of the sensor at the flow direction required. A coating of the sensor tip increases the endurance of the Sensor and avoids adhesions. The ex-changeable mineral insulated thermocouple is mounted with two M5x10 screws. The sensor parts are out of own production and manufactured on ultra-modern CNC-machinery.

operating temperature: up to 600 °C
isolated or non-isolated
single or double thermocouple
support via 5.5 mm wide x 2.5 mm deep furrow
G1/2” screw-in thread
exchangeable thermocouple

up to 600°C
operating temperature
G 1/2"
screw-in thread
5.5 x 2.5 mm
groove

MTF 112 Melt Probe

Please find following our standard thermo and compensating wires for MTF 112 Melt Probes listed. Others are available on request.

Fe-CuNi type L

part#	cross section	temperature range	outer diameter
1200455	2x0,22 mm²	-50 °C up to +400 °C	approx. 3,40 mm
1307289	2x0,22 mm²	-40 °C up to +180 °C	4,00 mm ± 0,10 mm
1200456	4x0,22 mm²	-50 °C up to +400 °C	3,80 mm max.

Fe-CuNi type J

part#	cross section	temperature range	outer diameter
1229818	4x0,22 mm²	-50 °C up to +400 °C	approx. 3,60 mm
1222528	2x0,35 mm²	-50 °C up to +400 °C	approx. 3,60 mm
2239028	2x0,35 mm²	-50 °C up to +650 °C	approx. 3,40 mm

NiCr-Ni type K

part#	cross section	temperature range	outer diameter
1298584	4x0,22 mm²	-50 °C up to +400 °C	4,00 mm max.
1200471	2x0,50 mm²	-50 °C up to +400 °C	approx. 3,50 mm