Tubular Cartridge Heaters

RPM/RDO-RP/RPO

APPLICATIONS

Tubular Cartridge Heaters are the ideal heating for injection moulding tools. They are suitable for the heating of spigot automats and for mandrel heaters, e.g. with tube extrusion. Further to this Tubular Cartridge Heaters find their application within hot runner systems, at machinery nozzles and within die-cast production.

Options

various dimensions (Ø/length)
voltage and wattage variations
various lengths and types of leads
other capacity tolerances
conical surfaces
with removal and assembling aid
with connection pins and plane front side
with capacity distribution

up to 600°C
operating temperature
5-10 mm
wall thickness per type
up to 15 W/cm²
surface load

RPM/RDO/RP/RPO Tubular Cartridge Heater

Material

Stainless steel 1.4541 or 1.4301

Connection options

fig. 1: frontal
fig. 2: frontal + strain relief
fig. 3: axial flat cap option 3
fig. 4: tangential flat cap option 4
fig. 5: 45° tangential RPM cap option 6
fig. 6: radial RPM cap option 7
fig. 7: 45° axial RPM cap option 8
fig. 8: 45° axial nozzle cap
fig. 9: 5° axial nozzle cap
fig. 10: radial nozzle cap
fig. 11: tangential nozzle cap

	RPM/RDO/RP/RPO
outer diameter	± 0,35 mm
inner diameter	H12 (depends on the length)
length tolerance	L 30 - 100 mm - ca. ± 3 mm L 101 - 150 mm - ca. ± 4 mm L 151 - 300 mm - ca. ± 5 mm L 301 - 400 mm - ---

Cable exit options

fibreglass insulated nickle leads up to 400 °C (GLS 400) or 700 °C (GLS 700)
fibreglass insulated nickle leads up to 400 °C (GLS 400) or 700 °C (GLS 700) with earth protection (SL)
3-core cable and metal braided hose steel or stainless steel + earth protection up to 400 °C / 700 °C
3-core cable and spiral hose steel or stainless steel + earth protection up to 400 °C / 700 °C
3-core cable and wave hose steel or stainless steel + earth protection up to 400 °C / 700 °C
fibreglass insulated nickle leads additional covered with un-coated fibreglas hose (400 °C)
teflon insulated leads (PTFE), 2- or 3-core, temperature-stable up to max. 260 °C