Plug-in Sensors
Plug-in sensors are ideal for all possible application of temperature measuring. They are available as straight and right-angle design. There are clamp-screws, screws, clips and stop rings available for mounting. Springs with special-fiberglass hose and 400 °C heat resistant varnish are standard. Furthermore are PVC-PFA-fiberglass thermo and compensating wires as well as fiberglass with metal braided meshing available. The TEF 15 is a right-angle sensor. The bend Ø 6 x 37 mm protection tube has soldered Ø 2.5 x 6 mm notch pin at the front side. The standard sensor tube has a Ø 3.5 and is 20 mm long.
Please find following our standard thermo and compensating wires for TEF 15 thermocouples listed. Others are available on request.
Fe-CuNi type L
| part# | cross section | temperature range | outer diameter |
| 1307289 | 2x0,22 mm² | -40 °C up to +180 °C | 4,00 mm ± 0,10 mm |
| 1200456 | 4x0,22 mm² | -50 °C up to +400 °C | 3,80 mm max. |
| 1200464 | 2x1,00 mm² | -50 °C up to +400 °C | approx. 4,50 mm |
| 1200465 | 2x1,00 mm² | -50 °C up to +400 °C | approx. 4,50 mm |
| 1256523 | 2x1,00 mm² | -50°C up to +500 °C | approx. 4,50 x 2,60 mm |
Miniature - round plugs with screw connection
| 3-pin | plug | T3260 | part# 1201415 |
| socket | T3261 | part# 1200722 |
| 4-pin | plug | T3300 | part# 1103624 |
| socket | T3301 | part# 1200723 |
Thermocouple plug connectors
| J type | plug | A9.1 | part# 1107127 |
| socket | A10.1 | part# 1107128 | |
| with cross section | 2x0,50 mm² | part# 1349300 |
| K type | plug | A9.2 | part# 1209136 |
| socket | A10.2 | part# 1134620 | |
| with cross section | 2x0,50 mm² | part# 1349300 |
Miniature plug connectors
| Lemo | cable Ø max. in mm | ||||
| sizes | 0S | 1S | 2S | 3S | |
| standard socket | 3,7 | 4,2 | 4,2 | 4,2 | |
| fitting socket | |||||
| standard plug | 3,7 | 4,2 | 4,2 | 4,2 |
design examples
Any
questions?
Find your contact person in one of our locations!
